太阳集团tyc151-太阳集团5493con

 欢迎访问太阳集团tyc151网站!

专注生产工业用超声波清洗机

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯如何延长超声波清洗机的寿命?
新闻资讯

如何延长超声波清洗机的寿命?

作者:创始人来源:/时间:2024-04-08

1、注意在使用过程中的电源

1. Pay attention to the power supply during use

使用超声波清洗机设备规范的电源和电源线,用户的电源电路必须配备专用于清洗机的空气开关,以便在需要时打开和清洁机电源。由于超声波清洗机与水、腐蚀(肿胀)液位接触,易引起渗漏,请遵照接地线的标准要求。

The user's power circuit must be equipped with an air switch specifically designed for the cleaning machine, in order to turn on and clean the machine power when needed, using the standardized power supply and power cord for the ultrasonic cleaning machine equipment. Due to contact with water and corrosive (swollen) liquid levels, ultrasonic cleaning machines are prone to leakage. Please follow the standard requirements for grounding wires.

20220308113640677.png

2、要注意在使用过程中定期清洗剂

2. Pay attention to regular cleaning agents during use

超声波清洗机采用不易燃洗涤剂,不使用易燃易爆物质进行清洗剂,使用设备时需确保易燃易爆物质的应用避免场合,用户必须使用一定的物质在特殊情况下,应咨询部门确认,并采取适当的措施。

The ultrasonic cleaning machine uses non flammable detergents and does not use flammable and explosive substances for cleaning. When using the equipment, it is necessary to ensure that the use of flammable and explosive substances is avoided. Users must use certain substances. In special circumstances, the department should be consulted to confirm safety and appropriate measures should be taken.

3、平时要注意讲究防潮的方法策略

3. Pay attention to moisture-proof methods and strategies in daily life

电气控制箱及相关电器元件如注意不要溅水,远离蒸汽、腐蚀性气体、灰尘等。在清洗槽内无液体或液位,会对设备造成不可逆转的损坏,使用所需的保证,使油箱进入全量的清洁液

Electrical control boxes and related electrical components should be kept away from splashing water, steam, corrosive gases, dust, etc. If there is no liquid or liquid level in the cleaning tank, it will cause irreversible damage to the equipment. Use the necessary guarantee to allow the oil tank to enter the full amount of cleaning liquid

4、注意经常清洁和运作条件

4. Pay attention to regular cleaning and operating conditions

当超声波清洗机长时间不使用时,请释放清洗液,在槽内和表面干燥后保护膜,防止设备腐蚀老化更快。保持超声波清洗机工作场所通风、干燥和清洁,这有利于超声波清洗机的长期有效运行,优化工作环境条件。

When the ultrasonic cleaning machine is not in use for a long time, please release the cleaning solution, dry the tank and surface, and protect the film to prevent faster corrosion and aging of the equipment. Maintaining ventilation, dryness, and cleanliness in the workplace of ultrasonic cleaning machines is beneficial for their long-term effective operation and optimizing working environment conditions.